Motorcycle Chain Cleaning Brush, 3 Sided Grunge Brush Tool

Motorcycle Chain Cleaning Brush That Reaches All Three Sides at Once

A dirty chain wears out fast, robs power and can leave you stranded. This motorcycle chain cleaning brush is a double ended grunge brush built to strip road grime, old lube and chain wax off your chain and sprockets in minutes. The U shaped head scrubs three sides of the chain in a single pass, so you stop wasting time with a toothbrush or a rag that only cleans the outer plates.

Who It Is For

Made for street riders, cruiser and sport bike owners, dirt bike and ATV riders, and cyclists. If your machine has a chain and sprockets, this chain scrubber tool keeps them turning smooth. It is a simple, low cost piece of motorcycle chain maintenance kit that belongs in every garage, tool roll or track day bag.

How Riders Use It

• Routine chain cleaning: spray chain cleaner or kerosene, run the 3 sided head along the chain, wipe and relube.
• Before lubing: a clean chain lets fresh chain lube reach the rollers instead of sealing grit inside.
• Sprocket and crankset scrubbing: flip to the long bristle end to dig packed grime out of sprocket teeth.
• After wet or dusty rides: fast cleanup that prevents rust and premature stretch.

Built to Last: Materials and Specs

• Brand: American Legend Rider
• Material: tough ABS handle with stiff nylon bristles that stand up to solvents and degreasers
• Design: double ended. One U shaped 3 sided head for the chain, one long bristle head for sprockets and hard to reach spots
• Size: 10 x 2.4 in (25.5 x 6 cm)
• Weight: about 2.6 oz (75 g)
• Colors: Red or Blue
• Fits: motorcycle, dirt bike, ATV and bicycle chains, cranksets and sprockets

Why Choose This Chain Brush

Most brushes only touch one face of the chain. The three sided head on this chain cleaning brush wraps around the links and cleans the top, bottom and side plates at the same time, including the dead spots other brushes never reach. The ergonomic handle keeps your knuckles away from the chain, and the whole brush rinses clean and stores flat. Regular use extends the life of your chain and sprockets, which saves you real money on replacements.

Pair it with the rest of our biker accessories or browse all motorcycle accessories to round out your maintenance kit.

Frequently Asked Questions

Does this brush work on motorcycle chains with O rings?

Yes. The nylon bristles are firm enough to lift grime but gentle on O ring and X ring chains. Use it with an O ring safe chain cleaner and avoid harsh wire brushes.

What cleaner should I use with it?

Any motorcycle chain cleaner, kerosene or a mild degreaser works. Spray the chain, let it soak a minute, then scrub with the 3 sided head and wipe dry before relubing.

Can I use it on my bicycle or dirt bike chain?

Yes. The head fits standard motorcycle, dirt bike, ATV and bicycle chains, and the long bristle end handles cranksets and cassettes.

How often should I clean my motorcycle chain?

A common rule is every 300 to 600 miles, and right after wet, muddy or dusty rides. A clean, lubed chain lasts far longer and shifts power to the wheel more smoothly.

What is the difference between the two ends?

The U shaped end scrubs three sides of the chain at once. The opposite end has longer bristles that reach deep into sprocket teeth and tight spots around the countershaft.

How do I clean the brush itself?

Rinse it in warm water with a drop of dish soap or a splash of degreaser, shake it out and let it air dry. The ABS and nylon build will not rust or soften.

Order Yours and Keep the Miles Rolling

Grab this motorcycle chain cleaning brush in red or blue with fast tracked shipping and a 30 day guarantee. A few minutes of scrubbing now beats a new chain and sprocket set later. Ride safe out there.